If the d ring, plastic back plate, fasteners, web tidies, adjusters or connectors do not look right (check the 'hardware inspection' question for details). A safety harness equipment inspection checklist is used by workers at heights to ensure that a safety harness is in good condition before use and reduce the risk of falling. Safety harness equipment inspection checklist. Work health and safety regulation 2011 s.306i 8.31 in the event that a fall arrest harness system has been used to arrest a fall, the system has been removed from use until its manufacturer or a competent. Hse guidelines recommend an inspection by a professional service every 6 months but ppe regulations require a minimum of 12 monthly inspections which should be recorded on the harness itself.
If the d ring, plastic back plate, fasteners, web tidies, adjusters or connectors do not look right (check the 'hardware inspection' question for details). Complete the inspection by rating the overall condition and providing recommendations to improve safe 2) inspect hardware for cracks, sharp edges, deformation, corrosion, rust, or other signs of wear or damage. Check ( ) ok or needs repair or adjustments (give details in comments section below). 3) ensure all labels and markings are legible. Download the general ladder safety inspection as a pdf. This safety harness inspection checklist template can be used as a baseline procedure for ensuring safe safety harnesses. Safety harness inspection checklist template.